Tag: deus skill school

Posted on by — Leave a comment

NEXUS Pathfinder V2 hellish frame with discrimination

The frame detector or the popularly known frame is a really great solution for the big game, but unfortunately also very demanding when it comes to the application itself. Everything has to be carefully thought out because the choice is wide and the possibilities are practically unlimited.

The NEXUS company needs no introduction. This is the world of analog detectors, unreasonably expensive, complicated, and IB technology.

So what is the difference between NEXUS products and others, apart from the quality of workmanship? In addition to performance, this type of two-box allows for quick movement over rough terrain and can only be operated by one person. It has discrimination and we are free to choose the type of guide we are looking for! Color or iron and smooth adjustment. Story!

YouTube player

Brilliant solution, considering that with a probe size of 20 inches, we see objects the size of soda cans and larger! There is no problem with small garbage that can make life unbearably difficult. To this, we will add a choice of operating modes: static and dynamic, ground calibration, and mineralization compensation. The extreme amount of iron is not a hindrance, and the device is made of aluminum and carbon fiber and can be quickly folded. The weight is about 4.5 kg, quite bearable.

Finally, the speed of work and we have a really nice daemon that is handy and easy to use. What is the voltage on the probes, I’m afraid to ask, and the large heat sink below the control panel is impressive. Below is a table presenting the capabilities of the Nexus Pathfinder V2.

Posted on by — Leave a comment

XP DEUS II program OMMONO

XP in the new DEUS II metal detector model implemented the old model in the form of the DEUS MONO program. Less clever people will tell me why I have a set of programs working in several frequencies at once, i.e. more stable, more resistant to worse conditions, and better signaling different conductors from both ends of the scale (silver and gold = wealth). So why single frequencies?!

The reason is simple, the device needs less time to process the data of only one frequency, and a well-chosen one can make it possible to reach a little deeper. The lowest frequency is 4 kHz and the highest is 40 kHz. Each of them has its advantages and disadvantages. Low is really deep and favors high conductors such as silver and large pieces of iron, high will better cope with heavy debris and high mineralization with fine and low conductors such as gold and small silver coins.

We sacrifice stability and try to squeeze everything we can out of the detector. Below is the OMMONO program especially for you:

The XY chart will help you identify:
Options/Configuration/Profile/XY

Menu:

  • Discrimination 6.1 at the beginning, EXPERT – PITCH tab (LEVEL translation error for software version 0.17)
  • Sensitivity to maintain stable operation
  • Frequency 4 kHz or 40 kHz description of what to choose and for what above
  • Iron volume 3 or zero if it will be too loud in the place
  • Base reactivity 1.5 set under conditions (trash 2 up)
  • Acoustic signal 4

Calibrate to the ground in a clean place, check the values in another, here manual ground calibration by the so-called. pumping or choosing a value is essential.

Posted on by — 2 Comments

XP DEUS II PROGRAM OMRELIC

The RELIC program in the new XP DEUS II detector is a kind of Holy Grail because it works on a completely different principle than other programs. It is closer to the Gold Field version, which is a typical program for searching for gold nuggets, also known as the ORX model. The multi-frequency characteristics do the job, especially in iron. The frequency oscillates around 24 kHz, which is optimal even on the more difficult ground and there is no great loss of depth.

IAR discrimination works by size rejection of the iron signal, but you can read about it elsewhere on my blog or watch a video on my Youtube channel. I recommend the XP DEUS II playlist for dummies!

YouTube player

So how do you properly set up the RELIC program to go really deep? We know it’s the deepest program next to DEEP HC, but how to squeeze more out of it? In the beginning, you choose the REACTIVITY responsible for the separation of objects. For me, the starting point is 1.5. For more cluttered places, I recommend 2 or even 3. A higher value means less performance when it comes to depth, but better separate objects. Here you have to adjust everything to the place and quantity – the intensity of the signals. Along the way, we set the sensitivity to the level of stable operation, we scan the channels so that the device automatically selects the most stable operating range.

The volume of the iron, the lead signal is already a personal preference, as is the amplification of weak signals. It is worth leaving the factory settings as the default. The leading signal THRESHOLD we need to raise a bit (software version 0.71).

We come to the most important thing – IAR discrimination. Here I set a maximum value of 3 to avoid losing low and fine gold guides, above this value, we risk more. A higher parameter gives less low signals and guarantees more stable operation. By entering the EXPERT tab, we can set NOTCH. In this case, it is a kind of audio discrimination that does not affect the performance of the detector, but unfortunately, very deep signals can give a value of 00 on the display. Fortunately, we will only lose the audio and the values are still displayed. It is important because 00 is a value close to the reading of the soil and also ceramics, which is a testimony of human presence in a given area.

You can always use NOTCH, it increases the comfort of work and translates into results. If the signals are bothering you, you can try to set the range from 00-06. You will not be overloaded with signals from rusty iron and over-response of the soil. There is always a risk of losing items masked next to this value, deep without ID as I wrote above. It is worth choosing settings for a given scenario or a search strategy you have developed in a given place.

Below is the OMNITRON program especially for you!

Remember to subscribe and get discounts (click):

Youtube
Sklep Omnitron
Omnitron Metal Detecting Group
Intagram

 

Program OMRELIC:

The XY chart will help you identify:
Options/Configuration/Profile/XY

Menu:

  • Discrimination IAR 3 (5 in the case of a large trash and large iron objects – note the risk of losing low conductors above 3) + EXPERT tab and set NOTCH to 00 or in the range of 00-06
  • Iron volume 3
  • Base reactivity 1.5 set under conditions (trash 2 up)
  • Acoustic signal 5
  • Leading signal 10 up or under your preference
  • Sensitivity to the level of stable operationScan the channels before starting work and when it loses stability. Hold the right panel arrow at the top. Perform a ground calibration as a last resort in a clean area if stability is a problem.

 

 

 

 

Posted on by — Leave a comment

A burnt field or a duel of an analog with a TV set

Is it possible to compare the analog detector DeepTech VistaX to XP DEUSA II? Theoretically yes, although in practice the disproportions are really large that it is impossible to put both devices together directly.

Weight, portability, compactness, and reconfigurability, build quality unbeatable in favor of XP. Audio also gives you more possibilities. Another shelf and another league of equipment, not to mention the price. For one XP DEUS II, we will buy exactly three VistaX!!!

When it comes to working in a littered area, it will also be a bit easier for us, but with one small exception, we will dig less, but we can skip more. In the case of an analog, you need to check and dig. An apparent disadvantage becomes an advantage in a very good seat! Unreliable signal with a bad ID on the display and we will miss the good one, and without we have to check it! A lot of masked signals and coins on the edge are easy to mine! It’s the whole analog mystery. There is something more.

In difficult terrain with a lot of iron, the devices go head to head with one small exception, the analog is always deeper and the difference is really noticeable, which we could check on the passing spot – the so-called. burnt. Easy sandy soil with a settlement base of iron, burnt coal, coke, and pottery. There, both detectors feel really good. The dot over and the nature itself put in the form of a shower, improving performance, but also increasing the risk of excitation of detectors on wet grass.

YouTube player

Both detectors had 11-inch probes. XP DEUS II worked in Deep HC or Relikt. Devices turned to maximum sensitivity. Reactivity in XP set to 1.5 along with a very slow sweep and cross-checking of signals did the job.
The difference is significant where XP, which is really deep, still has 2-3 cm of the reserve before it loses the signal, VistaX is easily over 5 cm deeper! Double discrimination gives you a chance to check the item under the probe. In some situations, the XP was already operating at the edge of the range, where the analog signal was still strong and reliable. At one point, after digging a 50 cm hole, we thought it would be a piece of rusty iron, but no! An object half the size of my little finger was in the dimple!

We must admit one more advantage of both devices, well-calibrated almost to the end of the scale signal – they show well the type of conductor (color or iron). We avoid the dilemma of digging up rusty scrap at the edge of the range… although this scrap can often be worth checking out!

The question is what will be the difference with VistaX with a 14-inch probe… another 5 cm is very real. Unfortunately, there are also disadvantages, a large probe means more mass, poorer balance and separation, and slower sweep. We’ll try to check it. Remember to subscribe and comment below the article!

 

Posted on by — Leave a comment

Battery and metal detectors

Nowadays, detectors have integrated batteries, is it good or bad, and how to care for this type of solution? Find out in the article below.

Modern power sources are already mostly integrated into the device. Field exchange is not possible. For some, it’s a disadvantage, because you have to remember to charge before going out, on the other hand, going for replaceable batteries in the middle of nowhere can often be completely futile, and we don’t always remember to take or check spare ones. The disadvantage can also be the number of charging devices. Such XP DEUS has a link in the probe, wireless headphones, and in the RC control panel … it’s a lot, although there is always an alternative, if the headphones are discharged, we have a panel and a loudspeaker, if vice versa, only headphones, and limited settings options.

You can always take a power bank with you or recharge it in the car, but it also takes time. Both solutions have some disadvantages, but what about the durability of such internal batteries? This is where electronics come in handy. Internal circuits manage the charging cycle. The service life is several hundred or more cycles, so it will be enough for some time, and the manufacturer provides for replacement, which can be done on your own or commissioned to the service.

How to charge? As I mentioned above, everything is managed by electronics, and the power of the charger affects only the time of the process itself. The USB standard reigns, so the matter is simple, we are looking for a connector or a charger. For your own safety, it is worth taking care of a good quality solution. YouTube is full of videos of spectacular fires of cheap USB chargers!

The detectors have charging indicators and the process itself takes a few hours, but what is the best way to check if the detector is charged when there is no such indicator or it does not work properly? In a very simple way. We touch the charger. Cold means the process is finished, warm means that we have to wait a little longer.

How often should we charge our detector? After every exit? Always connected? How to store?! The principle is simple. We discharge to 20% not to the end, so as not to burden the cell thermally, overheating drastically shortens its life. Charge to 80-100% capacity. During storage, the battery should not be more than 80% and less than 20%. It’s always worth checking. We will avoid problems in the future.

The replacement itself is not complicated for most solutions, although there are some that require a few gymnastics. For example, XP has a battery built inside the probe, which brings the problem of cutting the resin and refilling it after changing it. Fortunately, there are kits with instructions and there is nothing to worry about if we have a minimum of motor skills.

At the very end, the type of removable batteries. It’s not an easy topic. The market is full of substitutes. The simple rule is only branded and from proven sellers. Cheap cells do not work or only work for a while and fail at the worst possible moment. It is also important to check whether the device will work well with the batteries. They have a slightly lower operating voltage (they last for a shorter time than alkaline ones) and the electronics can play tricks on us, incorrectly signaling the moment of discharge. Strange behavior, and lack of stability of work and ranges are also not uncommon in such a situation. It is worth checking in the documentation attached to the detector what can and cannot be done.

If you liked this article, please share it on social media and comment below.

YouTube player
Posted on by — Leave a comment

3D imaging for whom?

Who needs 3D imaging? Is it useful at all in normal searches?

And yes and no… The reason is simple, it is quite a hindrance, which requires some knowledge and imposes a work regime. First of all, we need to properly configure the data logger and metal detector set, and not everyone is suitable for this. It is best to have the device working in static mode with VCO modulation. What does it mean? The tone changes – intensifies and weakens over the target, something like the so-called tracking function. Pinpoint in a dynamic detector. There is also the connection – wiring and signal calibration.

A good device is an equipment working as a PI or pulse induction – pulse detector. The advantage is the performance and stable operation on difficult ground, and the disadvantage is the lack of discrimination. It should be remembered that the imaging will concern rather larger objects. It depends on the probe, of course, but drawing the shapes of coins is rather pointless. We are interested in larger objects and such devices indicate this. The upside is that it’s the little bits that are omitted. It can be safely assumed that the 2×2 meter frame probe signals well objects the size of a can or larger.

The shape, approximate size, and depth are really good information. In an urbanized area, working with this type of device is more difficult due to evidence of human presence and infrastructure, such as pipes or wires. The advantage is also the visualization of empty spaces, such as basements, cavities, etc. A great solution for non-invasive research, site checking, and for commercial documentation of sites.

Currently produced devices, such as the GDI Icon 3D data logger we offer, are a fully wireless solution, for which a simple tablet based on the Android system is enough. If such a set is compared even with the finished Nokta Makro Invenio PRO product, it is 1/3 of the price and we have the option of choosing a detector with which the data logger works and thus slightly better performance, although at the cost of lack of discrimination.

In the end, there is the work regime, after the settings related to the type of detector and probe, select the sweep pattern. The software gives voice messages, and we follow the commands, i.e. we move at a certain time over a certain distance. It is worth marking the route with tape or plastic markers.

In the end, it remains to analyze the data in the form of a 3D chart and enjoy the results of our work!

YouTube player

 

 

Posted on by — Leave a comment

XP DEUS I and DEUS II which is better?

The flood of films about the advantage of DEUS I over DEUS II amused me a hundred times. Customers don’t know what to do… wait or buy?! In addition, there are also software updates, which cause a flood of extreme comments about the version that works and which does not. Complete confusion and chaos.

The first spline is a proven generation of metal detectors, we know all their advantages and disadvantages in everyday use. Model II is a great unknown, it would seem because multi-frequency technology is present in this model for the first time! Not completely. We have a MONO program where we can use DEUS II like its predecessor by selecting only single operating frequencies. We get two in one.

The new god of detectors works really well, and subsequent bugs are gradually corrected. This is not only the case for the French company XP, the competition is struggling with similar problems. Even domestic producers have found out that changing the software can be the key to success or total failure. The question is how much the hardware will allow us – i.e. the tripe of the detector. How good they are to meet the developer challenge.

For me, one thing is certain, DEUS I is by no means a thing of the past, but on the secondary market. The question is when XP will withdraw it from production and become an icon of sales portals like the old Whites models. We’ll see, meanwhile, it’s worth considering buying this detector, unfortunately, the price is an obstacle, over PLN 7,599 gross is an amount unavailable for many in Polish realities, even in the sphere of dreams.

So what does the new technology give and what does it change for the statistical Seeker? It’s simple, the device works more stably, is deeper, and in the case of a salty sea beach and highly mineralized clay, it allows you to reach deeper. For a lot of iron, hardware from France shines. Low and high conductors are signaled similarly confidently and unambiguously, which cannot be said about devices operating at one operating frequency. The above advantages will be useful in certain conditions and not everyone needs it, most users will be satisfied with much cheaper equipment, but there is one thing, but … Ergonomics and weight are unbeatable, the lack of cables also makes life easier, although DEUS II, like its predecessor, requires an experienced operator, or a lot of self-denial in learning the device.

If the assumptions described above are not met, it is worth getting interested in something simpler, because some functions require full understanding and, what is worse, they are permanently interconnected, which complicates the matter even more. Yes, it all takes time and patience, but it will certainly pay off in the future when others will have to give up.

Posted on by — Leave a comment

DeepTech Vista Gold Hound PREMIERE!

DeepTech Vista Gold Hound is actually a good and proven old school analog in the world of metal detectors. There is no finesse or materials straight from outer space here. Everything is average enough…but not the performance!

YouTube player

The efficient 30 kHz operating frequency allows you to work in slightly more demanding terrain and with very small objects. Are you looking for thin hammered silver coins or fine gold? You will find them. You won’t miss the signal and you’ll appreciate the advantage of the old solutions, where you go only by ear, and every colorful object is checked by digging. This is not the era of displays and conventional ID indications, where the desired coin and can are hidden under the same number!

YouTube player

You have to put some heart and strength into the shovel and we get results. You won’t miss anything, no chance. Another plus is the fabulously simple operation. Good headphones and on the road where only two tones accompany you. Yes, it’s a minimalist detector. You can turn down the low tone of the iron, but it’s worth hearing what’s going on under the probe and whether we’re in the right placeu.

The manufacturer DeepTech leaves us one more powerful weapon, TRESHOLD. Without reducing the sensitivity, we regulate the ground response. We want a quiet and easier work turn. We crave signals from ghosts and deep-seated objects? To the right. The perfect solution for passing places.

Many years ago, the boys made a video with the model GOLD. It beat all other equipment available at the time and there was a wave of hate that the test was being set up. He was not. We know it. You can make it yourself.

YouTube player

Is this a metal detector for everyone and for beginners? Yes, but not for every place. It will do great in a total dump, it is very sensitive, fast as hell and deep enough and unfortunately will not allow you to compromise. No lazy searching here. You don’t have time to check, risk missing the prizes and buy yourself equipment with a TV set!

Posted on by — Leave a comment

Nokta Makro The LEGEND kompletne zaskoczenie!

The Nokta Makro The LEGEND metal detector surprised me completely. I did not assume that the device is so well made and works stably and pleasantly. It’s too early to make a final judgment, but my buddies feel the same way. The device has potential.

Let’s start from the beginning. The premise of Nokta Makro was to take over a specific segment occupied by the Equinox 800 model from the Australian company Minelab … and I have a st

range feeling that it just succeeded!

In addition to the lack of defects, the quality and price known from the competition are impressive. We get real multi-frequency equipment, easy to use, waterproof, and really well made. A carbon Seatpost or really great quality wireless headphones with an additional case are really nice gestures and the fact that someone up there is listening to us. There are also disadvantages, such as sloppy glued shipping film, or keys without backlighting or coloring of function icon

s for better visibility. I’m probably picky, but I like complete solutions.

Weight and ergonomics are known from the cheap SIMPLEX+ model and this cannot be questioned, but let’s not forget. This is definitely a high-end detector! Why? The technology allows better signaling of low and high conductors, similar to fine gold jewelry. We will skip less. Work in salt water and highly mineralized soil? No problem. It’s a bit of a Swiss Army Knife, and it’s really refined. Of course, it’s not XP DEUS II, but I think that Minelab will start counting losses at this price quite soon.

The menu is simple and clear, but the settings are really amazing! Do you want to change the volume of signaling for a given ID, its tone, or range? No problem. Do you want to connect BlueTooth wireless headphones and not necessarily factory ones? No problem.

Okay, we already know that. The competition is similar. That’s a fact, but not at this price!

The Ferro Check function is nothing more than a bar showing to what extent the object under the probe is moving towards iron or color. It really makes work easier (caps and other junk), and if we add to it new polyphonic audio, a kind of multitone to choose from, we know much more. Purists can work in two or more tones, freely adjusting them. In the end, we save the ready settings after the pain. The lead signal doesn’t suit us? That’s not a problem either.

Flashlight, the vibration we know it. free update? Great nice too. Watch? Time is important, if the wife is waiting at home, it’s ok. Hour meter? Revelation. Now we know how much our detector really worked.

We have 4 programs such as PARK, POLE, BEACH, and GOLD FIELD. We have a depth indicator, we set the speed of separation of objects, the so-called recovery speed which also affects the depth. We automatically detune interference or select single operating frequencies: 4, 10, 15, 20, and 40 kHz.

I am very pleased with the choice of the MULTI work variant. The PARK and POLE programs, it is M1 and M2. M1 is a multi-frequency range sensitive to high conductors like silver, and M2 to low conductors like gold. This is a great move on the part of the manufacturer, allowing for precise adjustment to the prevailing conditions. The BEACH program has variants Mw and Md, where W (wet) means a wet beach and D (dry) a dry one.

The tests are ongoing. I hope you will share your opinion under this post, more information can be found in the video below:

 

 

YouTube player

 

 

 

 

 

 

Posted on by — Leave a comment

Tarsacci MDT 8000 how to set up?

How to set up the Tarsacci MDT 8000 detector correctly? The device has a clear and simple menu, without any hidden functions, but still requires a lot of time to take advantage of the new technology, which is not used by any other manufacturer.

The first and key choice is the operating frequency of our detector. We choose from 6.4 to 18 kHz. Interestingly, even a low frequency allows us to detect very small objects in size … well, the charm of PI (pulse induction) used in this hybrid. Lower frequency means better performance – depth, but also worse separation of objects in cluttered terrain. It is also better for signaling coin-shaped and volume objects, as opposed to foil or pieces of aluminum.

Another workflow problem. We have three types: all metal, discrimination, and mixed mode. All Metal will be good for virgin spots, where the signal appears from the holidays. We only have one and we have to look at the ID displayed on the screen. DISC is the only right solution for total trash. The signal is short and if it is repetitive you have to dig. The mixed mode gives us additional information about the size and depth of the object. Places clean or moderately littered.

Before we start, we look for a clean place and calibrate to the ground, if we still have a signal from the ground, we increase the value by 50, this should mute the device. Next, we hear the response of the ground. We can try to use the SALT function – salinity level. We pump the probe traditionally above the soil and adjust the value to mute the response. The starting point is 29. Finally, we are left with THRESHOLD – TRH. You have to be careful here. Too high a value and we lose ranges and we will not hear small objects. We always set the limit. If the ID shows low values when sweeping the probe, we need to compensate with this function.

Iron breaking through the scale and falling into color can be handled by using a DISC value of -29 or +26. Finally, there is the sensitivity adjustment. It’s not worth exaggerating. MDT 8000 already at a value of 4 is deeper than most known detectors. We eliminate all instabilities and interferences by reducing the sensitivity or changing the frequency.

I am curious about your opinions on the Tarsacci MDT 8000 detector, write under this post.

YouTube player
Posted on by — Leave a comment

XP DEUS II program GENERAL

The GENERAL program is the basic solution for the XP DEUS II detector. A starting point from which to start, but also a good base for learning and later modifications for your needs.

There are no universal solutions and if someone believes something like that, they are simply naive. Just like ready-made programs for anything and everything. We always start by choosing a program tailored to the subject of the search. For the multi-frequency version, we are looking at the frequency range. Their range will tell us whether the object of our interest will like them. Low conductors like gold love high frequencies, and silver the opposite. This is our primary indicator. Very difficult conditions and tons of iron, maybe it’s worth trying on a single frequency with the DEUS MONO program?

We return to the basic program. We start with setting the REACTIVITY, the most important parameter that affects the performance of the device, such as depth and separation of objects placed next to each other. A higher value and the detector becomes shallower, but it separates objects better, lower and we have a greater depth, but we have to sweep slower and we may not hear a coin placed next to iron, e.g. a nail. So how to choose the settings? We check what is happening under the probe and make a decision. We can experiment with different settings and see how it affects signaling and ranges.

The next step is the GB tab and selecting the GROUND STABILIZER function, a type of filter that affects the response of the substrate. The default value is 2, which is a medium mute level. At level 1, you can walk with some experience. The detector becomes less stable, but a little more can be heard. The end of the scale is a value of 3, the perfect compromise for soils that have a lot to say and make our lives miserable in the form of disturbances. We return to the filter called SILENCER, another compromise between performance and comfort of work, allowing us to eliminate crackling caused by iron elements in the substrate. A high value causes less interference, a lower value ensures that we can hear more again.

We are left with the choice of the type of audio. PWM or SQUARE is a personal preference. We have to answer the question of how much of an orthodox Deusiarz (PWM) or Minelab lover (SQUARE) we have in us. Sensitivity settings or calibration to the soil in a given place probably do not need to be explained, we still have audio and the choice of the number of tones. It depends on the place and personal preferences – your hearing.

The rest is hard training and a lot of work is put into settings and understanding. Without it, there is no chance of results. If you have any questions, comment directly under the video.

 

 

Posted on by — Leave a comment

XP DEUS II program RELIC

I spent last Sunday testing the XP DEUS II metal detector. I can’t get rid of the RELIC program. Unfortunately, habits probably prevail over reason, but one by one.

As we know, this program is similar to the well-known DEUS I under the name GOLDFIELD. Yes, it’s a typical tool for finding gold nuggets. Discrimination called IAR (Iron Amplitude Rejection) works in a completely different way than the classic solution. The device rejects iron by volume, according to the signal strength, and it can be adjusted in the range from 0 to 5. The last value means the strongest – the largest objects/signals.

The program is not for everyone. Why? This is a typical All Metal, in which we have one signal, although modulated to low and high conductors. The iron is signaled by a low tone, the volume of which can be additionally adjusted. As I mentioned earlier, the IAR value determines its volume – the signal strength. In practice, this works great, provided that the area is not extremely cluttered and you can set the REACTIVITY value low, which gives us even better performance in the case of depth. The fact is, you have to sweep slower and use the XY chart (link on YouTube), which additionally supports identification.

Audio in the form of PITCH modulated tone depending on the signal strength with the superimposed PWM profile (DEUS I) or SQUARE (new audio closer to Minelab) also helps a lot. Audio amplification and lead level are also additional tools that greatly improve identification. It is worth setting them well for the conditions prevailing in a given place, thanks to which we have more control over what happens after the probe.

With good settings and not too mineralized soil, the detector is really very deep. I pulled out an old ornament from a good 40 cm, and the signal was tearing the headphones. Certainly, in a place where there is a lot of colored garbage and iron, it is worth using the FAST or GENERAL program, they set the filters (functions) appropriately for the prevailing conditions beforehand, or in the case of total garbage, try the DEUS MONO variant. Unfortunately, all this takes time and conditions, and these have recently been very scarce.

Posted on by — Leave a comment

Clash of the Titans

The recent debut of XP DEUS II gave me a lot to think about. You can still feel the legacy of Whites Spectra in such an edition that it should be praised. The French company coped with this challenge quite well. Everything else is well known to us and things like wireless or featherweight no longer shock us. The novelty is water resistance up to 20 meters, which opens up completely new possibilities.

How does the TARSACCI MDT 8000 fare against this background? Many people would like to know what is the difference. The build quality and carbon fiber used put it truly in a class of its own, but the DEUS II leads the way here by the full length. It’s good, but as we know, everyone is one step behind and it’s been like this for many years. The weight of 1300 grams is currently the standard in the class of professional devices. Technically, however, we live in two different worlds. DEUS II is a multi-frequency metal detector, while MDT 8000 is a hybrid of VLF and PI (pulse induction) technologies.

So what is the advantage of such a solution? The technology is pioneering and patented in the USA and Europe, but does it really give you something more to spend your last pennies on this detector?

Just carry out a simple test and everything becomes clear. TARSACCI allows you to maintain a stable and unchanging ID in the close presence of small pieces of foil, magnetic stones, or high salinity or high mineralization. This advantage makes the device more resistant to masking. It will cope with more difficult conditions without changing the reading due to the presence of the above-mentioned disturbances and without limiting the depth.

A simple test gives the answer. By sweeping a piece of foil the size of a coin and a coin 5-10 cm above it just in front of the TARSACCI probe we have a fixed and non-changing ID. The foil does not change our signal, similarly, coke and rocks, and iron do not have such a big impact. For the sake of accuracy, we are talking about coin-sized items here. The same test in the case of DEUS II already gives a significant drop in ID.

The advantage of the last XP is multi-frequency, which allows the signaling of equally clear objects from both ends of the scale. Even for low and high conductors. Fine gold as well as heavy silver. The performance may be slightly worse, but in the case of one frequency, it will be slightly better. We have to answer the question what are we interested in? Good signaling of various objects or less masking effect in very difficult conditions? It all depends on the place and subject of the search.

Both models of detectors have the ability to fine-tune settings. DEUS II has more possibilities, and the MDT 8000 is simplified to such an extent that for professional equipment from the top shelf, it is simply strange. The producer decided to put everything on one screen. There are no drop-down submenus like in XP. We see everything at a glance and we don’t have to check if one of the many filters is definitely well-selected and does not affect our performance.

In conclusion, the race is fierce and it is difficult to pick a winner and compare both detectors directly. TARSACCI is more of a Swiss army knife, equipment for heavy and complicated scenarios, where high mineralization or salinity requires the use of a heavy caliber. DEUS II is a versatile, fun metal detector that is lightweight and waterproof, with great configurability and wireless connectivity to make your life easier.

Please remember to subscribe to my YouTube channel and social media on Facebook and Instagram. Links below.

Youtube:

https://www.youtube.com/channel/UCa7McxkrH2DNavMWcOBFU2g

Facebook:

Omnitron Store:

https://www.facebook.com/Omnitron-318061209114734

Omnitron Metal Detecting Group

https://www.facebook.com/groups/340050200024326

Instagram:

shop_omnitron

 

Posted on by — Leave a comment

New accessories for XP DEUS

I am honored to introduce you to the new accessories for XP DEUSA I and II, designed and made by us. It is a special stand weighing 21 grams to prevent the detector from tipping over in the field and a cover for the wear-off tip of the pinpointer from the Mi 4 and 6 families.

Posted on by — Leave a comment

XP DEUS II Settings Bible

How to fix XP DEUSA II in the field, or is there some magic program? There isn’t and if you think that then you’ve been scammed like a sucker… there is no such thing and remember that well as it will affect your performance in the future and applies to any other metal detector.

Let’s start with, have you read the user manual? If not, do it twice. Why twice? The second time is for punishment … and seriously for understanding and consolidation. In the era of electronic devices, you can always have it on your smartphone and reach it at any time when you have doubts.

The first thing is to choose a program. Here we must be guided by the conditions and the object of the search. We reach for our bible, i.e. instructions, and choose. For example, we are looking for large silver coins, our choice is the simple DEEP HC program. There are two programs to choose from BEACH for rather dry conditions and larger objects with an upper operating frequency of up to 24 kHz (multi-frequency program). BEACH SENS up to 40khz also in water and in addition to very small jewelry, preferably gold (a joke for water sportsmen).

The PARK program is ideal for dry places, also beaches, and places heavily polluted, especially with foil. For this reason, it has a set of selective discrimination, the so-called NOTCH in the range of 23 to 36 IDs.
FAST program for landfill and heavily mineralized conditions with lots of iron. It is also not very deep, which is worth remembering all the time. The SENSITIVE program is designed for places also cluttered to find very small objects, e.g. thin and hand-minted coins. Good for wet ground full of magnetic stones, coke, or foil. SENSI FT is a modified version of the program for more experienced users. It carries more information in the audio line due to the use of multitone sound. Nuances and details will allow you to better identify items.
For dessert, RELIC is for finding larger objects, but also gives advice on coin-sized artifacts. Deep. An innovative solution is the use of IAR-type discrimination, consisting in the elimination of iron depending on its size – signal intensity. The program gives great results but is more difficult to use, except that it is a typical all-metal without discrimination, signaling all signals with one modulated tone. It can be used, for example, on stubble by lifting the probe up to 15 – 20 cm above the soil level.
On the way, we pass the MONO single-frequency version. It’s such an old, kind DEUS I closed in the form of a separate program in the DEUS II box. Romantic? Definitely! Here you can go crazy and choose any operating frequency. For example, we use the lowest 4 kHz and can use this program to search for deep-seated objects with high conductivity. Similarly, the other way around 40kHz and thin, tiny low conductors are ours. Of course, all this affects the performance and stability of work and requires setting other operating parameters.
I should start with GENERAL because it’s a basic program … If in doubt, I choose this one. Good for wetlands, where we will avoid digging false signals, so-called. ghosts associated with the halo effect. Coke, magnetic stones are omitted. It signals deep targets well.

Let’s move on to tenderness. This is usually already set high in the factory programs, but if the conditions allow, we set it to the level of stable operation, and we try not to overdo it.
Phew, and only now we come to something equally important. Ground calibration. We select a clean spot and use the GRAB function or the middle button with a red circle, the same one that activates the PINPOINT. It is worth mentioning that PINPOINT is a great option for finding a clean place for our calibration, it is simply easy and pleasant. We check the value that tells us what type of soil we have and what to expect. The mineralization level bar should also give us food for thought as to how all this affects our search results.
We are doing a test flight … that’s how we check the degree of litter and the presence of iron. Simply put, are the signals frequent next to each other or rather sporadically every few meters? After the initial analysis, we reach for the REACTIVITY function and this is the key, because both the depth and work in a littered area depend on this setting. A value of 0 to 1 is iron-free and garbage-free conditions. Then the ranges are the best. From 2 to 2.5 medium clutter, and 3 to 5 serious garbage, where there is a signal on the signal and objects detected not too deep. At high values, the separation of objects located next to each other will be the greatest, the opposite range.
We still have SILENCER – you silence in places where a large amount of iron causes crackling and interference. Then we reach for this option, setting it at a level that provides us with the relative comfort of work. It must be remembered that high filters always run the risk of losing the deepest and quietest signals.

Depending on the program, we can choose the level of discrimination and the volume of the leading signal. In both cases, we proceed similarly, we try to find the lowest possible level. Discrimination is often associated with a loss of depth, and in some models causes problems with signal processing when the terrain is heavily littered. The leading signal (depending on the program, e.g. RELIC) must operate at the audible level. Its discrete substitutions will tell us what kind of target we have under the probe.
In the case of beach programs, we have SALT SENS, i.e. compensation for interference resulting from the salinity and conductivity of the ground, and MAGNETIC GROUND, which allows us to avoid masking deep-lying objects by ferrite, black sands – i.e. highly mineralized substrates such as a volcanic or even a stony beach.

We check what level of iron saturation our spot has. Here, the decision made will have an impact on the results. Using IRON VOLUME, we can freely turn down or turn up the sound of the iron. When the iron starts to really bother us, it is worth setting its sound to the most acceptable level. I am against total silence. Firstly, it is a signal that there must have been some human presence in this place, and secondly, in my case, objects made of iron can be no less interesting than those that contain only non-ferrous metals.
AUDIO RESPONSE, i.e. audio amplification. It’s worth checking the setting. Values above 4 may cause a situation that minor disturbances or false signals will mask the quiet and deep and most desirable ones. Too high a value also causes an unpleasant effect of changing the proportion between weak and strong signals.

Finally, the GROUND STABILIZER global filter. Usually set to 2 or 3, where the last number causes a very strong muting of the ground influence on the detector’s operation. The level assigned to the value 1 is already loud and unstable work, signaling, ferrite, ceramics (bricks), causing us a well-known headache with DEUS I, but allowing to reach even deeper where silenced devices do not reach!

Audio can be selected according to the prevailing conditions. PWM or SQUARE. The first traditional one is more expressive and carries more information, unfortunately in more difficult conditions it causes fatigue. The second version is soft and pleasant, perfect for dumpsters, where a lot is going on, and we want to survive in the best possible shape until the end of the day and hear and understand what our wife is saying to us at dinner.

Please remember to subscribe to my YouTube channel and social media on Facebook and Instagram. Links below.

Youtube:

https://www.youtube.com/channel/UCa7McxkrH2DNavMWcOBFU2g

Facebook:

Omnitron Store:

https://www.facebook.com/Omnitron-318061209114734

Omnitron Metal Detecting Group

https://www.facebook.com/groups/340050200024326

Instagram:

shop_omnitron

Posted on by — Leave a comment

XP DEUS II program RELIC and IAR

The new XP DEUS II surprises. I mean this seriously because over the last few years my DEUS I has been dusting a bit in the closet. As you can see, the French have drawn conclusions and decided to change a lot for the better. The new audio does the job. It does not tire, it is soft and pleasant. This is important because the detector should give joy, not fatigue. This is often the last bastion of freedom for many of us. Our couple of hours on the weekend, separated from reality in nature.

IAR (Iron Amplitude Rejection) discrimination and the RELIC program I decided to test on a well-known field with high mineralization and high iron content. First, run and I can’t hear the audio. Nervous situation. Restarts the hardware. In this place, all the equipment sounds beautiful … but not the new DEUS II. It is so stable that I was fooled like a child by a supposedly non-working loudspeaker … For the first 20 minutes, both Mariusz and I are completely surprised. No, we don’t find anything, but that’s not the point. The detector signals target only. Audio flows and multi-technology stabilize the rough ground. How about the performance? Too early to judge.

To make it better, it is All metal and you can also hear iron, although factory muted. The time for real tests will come in the season. Playing at temperatures below zero degrees Celsius is a bit masochistic, but it was worth it. Remember to subscribe and we’ll meet soon.

Posted on by — Leave a comment

Minelab Manticore or XP DEUS II?

XP DEUS II vs Minelab Manticore who will win this duel? It depends … it depends on what we expect from both detectors because both are really good.

DEUS II is the king of ergonomics when it comes to the lack of cables, weight – 960 grams, and compactness, and there has been no competition in this category for years. What else? The audio was created by a real musician. Also undefeated for years, although Minelab created more pleasant tones and less tiring, also worse describing the subject. What is the difference? On nuances and additional sounds and their change and their modulation and volume. A piece of aluminum in the form of a can sounds differently than a coin, even if it is similar in its conductivity. It’s a lot. After a while, we know what is what. That’s what it’s supposed to be about. Disadvantage? In the long run, such audio can cause fatigue, especially in areas littered or full of iron. This is a minor difference, but for an experienced user, it is crucial.

Do we know anything more? Yes. Thomas Dankowski from the USA is a well-known American device tester before releasing them to the market. Over 40 years of experience is indisputable and his contribution to the development of many well-known devices is crucial. He has been testing Minelab Manticore for over a year and on the Dankowski forum (link: https://www.dankowskidetectors.com/discussions/index.php) he shared his observations with us, comparing it to devices such as XP DEUS II and Tarsacci MDT 8000 which also tested.

The Minelab Manticore was tested on the coast and on the beach, the inland tests simply did not take place and according to Thomas, the new Minelab is a slightly worse separating detector than the XP DEUSA II. Calabash Digger drew similar conclusions in his tests, which can be seen on his YouTube channel.

One important observation has been mentioned, the Manticore will be slightly deeper and it’s a matter of an inch or so (2-3 cm). This means performance at the level of the Tarsacci MDT 8000, which is a PI/VLF hybrid device and this means that such equipment is always deeper.

The 2D visualization of the Minelab detector in a clear field allows you to analyze the target, something more than the well-known XY plot from DEUSA XP. Unfortunately, with a large amount of iron, it does not work so perfectly and can lead to disappointment. As we know, everything requires learning.

The thing to check is the color spoof issue with heavy condensation of rusty items, but that takes time and fieldwork. It should be remembered that new software updates can change a lot for both manufacturers.

Posted on by — Leave a comment

Nokta Makro The Legend System Software Update 1.10 beta

Updates Made:
1. M3 multi frequency in PARK mode has been updated to prevent coins from being masked by aluminum foil.

2. Bottle Cap Rejection setting has been added.
When the device is in multi frequency, select the Recovery Speed setting and press the pinpoint button. When you navigate with the right and left buttons, you will see the letters “bC” appear on the right side of the screen. You can adjust the bC value between 1-8 using the + and – buttons. When the bC is 0, it means that it is off.

3. Ground Suppressor setting has been added.
It is used to eliminate false ground signals in tough terrains. To access the setting, select the Recovery Speed setting and press the pinpoint button. When you navigate with the right and left buttons, you will see the letters “GS” appear on the right side of the screen. You can adjust the GS value between 1-8 using the + and – buttons. When the GS is 0, it means that it is off. It is recommended that you leave this setting at off position unless needed.

4. The audio emitted as the Tone Break points are changed while in 60-Tone, has been modified with increased bass.

5. Audio Gain setting has been activated in the Gold Field Mode.

6. Warning tones have been added to the buttons.
The buttons will now emit a warning tone in the following cases:
a) To indicate the minimum and maximum levels of settings.
b) When an inactive setting in a specific mode trying to be activated.

7. The brightness of the Backlight Level 1 has been reduced.

8. Bluetooth Chip Version will now be displayed.
When the Bluetooth headphones are paired with the device and the Bluetooth setting is selected, press and hold the Discrimination button. The Bluetooth chip version will be displayed in the clock section. When the button is released, the clock will be displayed again.

9. While in Automatic Ground Balance, the auto backlight will now be lit until the ground balancing is completed.

10. The loudness of the Volume Level 1 has been reduced in PARK, FIELD and BEACH modes.

11. A new level 9 has been added to the Iron Filter (IF) setting.
There has been no change to the levels 1-8. Level 9 will become handy when trying to discriminate some unwanted mid-conductors such as shotgun cartridges as iron.

12. General improvements have been implemented.

 

Posted on by — Leave a comment

Minelab Manticore The beast is out of the cage

The new beast Minelab Manticore detector and my first impressions. The price knocks you off your feet, but let’s leave it for now and start with the ML 105 wireless headphones. The build quality itself is top shelf. It can be discussed whether such closed and thickly upholstered headphones are a good choice. It’s a matter of taste and season.

Everything is complemented by a spiral cable with jack plugs for connecting headphones via a waterproof connector in the panel. Different sound quality and a nice option. Although I would not enter the water with such a set … it will fall and there is no topic.

The armrest is another example of how you can approach it in a practical way. Adjustment with a simple latch instead of a problematic screw. Way to go.

The soft design of the plastics and the strap with the logo complete the whole. It convinces me, all beautifully set on a carbon fiber seatpost with quick-release locks. In the back part, a plug for rinsing the whole after wading in sandy water. Plus.

The handle with a rubberized grip and a good angle, as well as the undercut for the index finger for weight transfer are another plus.

The panel looks sensational and here the performance of the detector is also not surprising. Buttons, display all in place and finished with the highest quality materials.

The panel looks sensational and here the performance of the detector is also not surprising. Buttons, display all in place and finished with the highest quality mater

The whole is well-balanced and compact, you can’t ask for more. No more flooding electronics like in the old Equinox model and no more breaking probe ears. Now the mount has been moved to the lower element of the frame and even if it breaks, it is not the cost of the entire probe. The 11-inch probe has additional reinforcements and does not stand out from the whole.

YouTube player