Posted on Leave a comment

XP DEUS II Settings Bible

How to fix XP DEUSA II in the field, or is there some magic program? There isn’t and if you think that then you’ve been scammed like a sucker… there is no such thing and remember that well as it will affect your performance in the future and applies to any other metal detector.

Let’s start with, have you read the user manual? If not, do it twice. Why twice? The second time is for punishment … and seriously for understanding and consolidation. In the era of electronic devices, you can always have it on your smartphone and reach it at any time when you have doubts.

The first thing is to choose a program. Here we must be guided by the conditions and the object of the search. We reach for our bible, i.e. instructions, and choose. For example, we are looking for large silver coins, our choice is the simple DEEP HC program. There are two programs to choose from BEACH for rather dry conditions and larger objects with an upper operating frequency of up to 24 kHz (multi-frequency program). BEACH SENS up to 40khz also in water and in addition to very small jewelry, preferably gold (a joke for water sportsmen).

The PARK program is ideal for dry places, also beaches, and places heavily polluted, especially with foil. For this reason, it has a set of selective discrimination, the so-called NOTCH in the range of 23 to 36 IDs.
FAST program for landfill and heavily mineralized conditions with lots of iron. It is also not very deep, which is worth remembering all the time. The SENSITIVE program is designed for places also cluttered to find very small objects, e.g. thin and hand-minted coins. Good for wet ground full of magnetic stones, coke, or foil. SENSI FT is a modified version of the program for more experienced users. It carries more information in the audio line due to the use of multitone sound. Nuances and details will allow you to better identify items.
For dessert, RELIC is for finding larger objects, but also gives advice on coin-sized artifacts. Deep. An innovative solution is the use of IAR-type discrimination, consisting in the elimination of iron depending on its size – signal intensity. The program gives great results but is more difficult to use, except that it is a typical all-metal without discrimination, signaling all signals with one modulated tone. It can be used, for example, on stubble by lifting the probe up to 15 – 20 cm above the soil level.
On the way, we pass the MONO single-frequency version. It’s such an old, kind DEUS I closed in the form of a separate program in the DEUS II box. Romantic? Definitely! Here you can go crazy and choose any operating frequency. For example, we use the lowest 4 kHz and can use this program to search for deep-seated objects with high conductivity. Similarly, the other way around 40kHz and thin, tiny low conductors are ours. Of course, all this affects the performance and stability of work and requires setting other operating parameters.
I should start with GENERAL because it’s a basic program … If in doubt, I choose this one. Good for wetlands, where we will avoid digging false signals, so-called. ghosts associated with the halo effect. Coke, magnetic stones are omitted. It signals deep targets well.

Let’s move on to tenderness. This is usually already set high in the factory programs, but if the conditions allow, we set it to the level of stable operation, and we try not to overdo it.
Phew, and only now we come to something equally important. Ground calibration. We select a clean spot and use the GRAB function or the middle button with a red circle, the same one that activates the PINPOINT. It is worth mentioning that PINPOINT is a great option for finding a clean place for our calibration, it is simply easy and pleasant. We check the value that tells us what type of soil we have and what to expect. The mineralization level bar should also give us food for thought as to how all this affects our search results.
We are doing a test flight … that’s how we check the degree of litter and the presence of iron. Simply put, are the signals frequent next to each other or rather sporadically every few meters? After the initial analysis, we reach for the REACTIVITY function and this is the key, because both the depth and work in a littered area depend on this setting. A value of 0 to 1 is iron-free and garbage-free conditions. Then the ranges are the best. From 2 to 2.5 medium clutter, and 3 to 5 serious garbage, where there is a signal on the signal and objects detected not too deep. At high values, the separation of objects located next to each other will be the greatest, the opposite range.
We still have SILENCER – you silence in places where a large amount of iron causes crackling and interference. Then we reach for this option, setting it at a level that provides us with the relative comfort of work. It must be remembered that high filters always run the risk of losing the deepest and quietest signals.

Depending on the program, we can choose the level of discrimination and the volume of the leading signal. In both cases, we proceed similarly, we try to find the lowest possible level. Discrimination is often associated with a loss of depth, and in some models causes problems with signal processing when the terrain is heavily littered. The leading signal (depending on the program, e.g. RELIC) must operate at the audible level. Its discrete substitutions will tell us what kind of target we have under the probe.
In the case of beach programs, we have SALT SENS, i.e. compensation for interference resulting from the salinity and conductivity of the ground, and MAGNETIC GROUND, which allows us to avoid masking deep-lying objects by ferrite, black sands – i.e. highly mineralized substrates such as a volcanic or even a stony beach.

We check what level of iron saturation our spot has. Here, the decision made will have an impact on the results. Using IRON VOLUME, we can freely turn down or turn up the sound of the iron. When the iron starts to really bother us, it is worth setting its sound to the most acceptable level. I am against total silence. Firstly, it is a signal that there must have been some human presence in this place, and secondly, in my case, objects made of iron can be no less interesting than those that contain only non-ferrous metals.
AUDIO RESPONSE, i.e. audio amplification. It’s worth checking the setting. Values above 4 may cause a situation that minor disturbances or false signals will mask the quiet and deep and most desirable ones. Too high a value also causes an unpleasant effect of changing the proportion between weak and strong signals.

Finally, the GROUND STABILIZER global filter. Usually set to 2 or 3, where the last number causes a very strong muting of the ground influence on the detector’s operation. The level assigned to the value 1 is already loud and unstable work, signaling, ferrite, ceramics (bricks), causing us a well-known headache with DEUS I, but allowing to reach even deeper where silenced devices do not reach!

Audio can be selected according to the prevailing conditions. PWM or SQUARE. The first traditional one is more expressive and carries more information, unfortunately in more difficult conditions it causes fatigue. The second version is soft and pleasant, perfect for dumpsters, where a lot is going on, and we want to survive in the best possible shape until the end of the day and hear and understand what our wife is saying to us at dinner.

Please remember to subscribe to my YouTube channel and social media on Facebook and Instagram. Links below.

Youtube:

https://www.youtube.com/channel/UCa7McxkrH2DNavMWcOBFU2g

Facebook:

Omnitron Store:

https://www.facebook.com/Omnitron-318061209114734

Omnitron Metal Detecting Group

https://www.facebook.com/groups/340050200024326

Instagram:

shop_omnitron

Posted on Leave a comment

DeepTech metal detector – heir to Tesoro

The Tesoro metal detector was synonymous with durability and quality, simplicity, and outstanding performance. Unfortunately, like Whites Electronics, it was lost in the depths of history. It won’t come back anymore. DeepTech used the legacy of Tesoro, adding a lot from themselves, and while you can have reservations about the quality of workmanship, absolutely not when it comes to performance and audio.

Analog devices

The simplicity of analog knobs and two-tone audio does not appeal to every Seeker or Detector. You have to be born with it or love it. There are no bells and whistles, you will not see the display and numerical identification of the target. Ground calibration is manual. In this way, we get to know the roots of detecting, and the adventure with the metal detector becomes complete. We learn the equipment and the principle of operation, we understand many factors that we normally miss.

Such analog organicity in the world of metal detectors. The lack of a scale of numbers forces us to constantly work, it is more difficult to skip items because you have to check it. Our hearing becomes our ally in the search, and not the board in the detector housing, but our brain becomes the computer. There is a no faster and better computer.

I remember Mariusz and I were surprise when, testing the 14-inch probe for the Vista X detector, we buried Kopeyka at 67 cm in an arable field. We couldn’t believe that the device would signal it. We checked a couple of times. We had doubts about whether something had been overlooked us. Next was a 47 cm thin silver coin, similarly loud and clear. The last was the base of the IWW fuse, a trifle 1 meter 20 centimeters long. There are no illusions.

On top of everything comes double discrimination, which allows you not to lose off-road performance. The most important depth. Other metal detectors don’t have that choice. We set discriminate and lose performance. Here we can check items. In the DeepTech Vista X model, there is also the so-called. Threshold, i.e. adjustment of the threshold signal, in this case, it is rather a ground filter, allowing for smooth regulation of its response. We want to work silently, without ghost signals or interference, we just turn and kick certain signals only. We want to reach deep, we dial the threshold and look for ghost signals. We only dig the silent deepest targets.

 

Alternative to SMART PRO+

Anyone who appreciates simplicity can choose the SMART PRO+ model. Why? It does not have double discrimination or Threshold, but it has a Pinpoint with which we can precisely target targets and, with a little practice, check their type. A simple and intuitive device, which, according to the manufacturer’s assurances, is not inferior to the Vista X model.

Summary

Finally, there’s the Vista Gold Gain II metal detector. The high frequency of operation allows searching in heavier soil conditions and with greater iron contamination and highlights small and thin objects. Gold jewelry or silver coins are no longer a problem.

Everyone will find something for themselves and that’s for sure. If you want to focus on the results and not on the equipment, take a chance and choose DeepTech.

Posted on Leave a comment

The best Tarsacci MDT 8000 detector revolution in the user’s eye

Half a year ago, if someone had told me that I would get a professional detector like the Tarsacci MDT 8000, I would not have believed it at all … and I did not believe it waiting for a device straight from the USA. I had my doubts standing in the field with him. Now I’m sure. This is the best device I’ve had in my hands for over 10 years … unfortunately, not the cheapest either.

Pros and cons of the detector

I understand there will be two camps here. One says that a good thing must cost money and the other is where you can buy really great equipment for 1/2 the price. Both sides have their reasons, but as we know, the devil is in the details.

Quality workmanship knocks down. No slack, fudge, or complaints … there is one defect of the carbon detector post … apparently, it whistles in the wind … that’s what I read on the Tarsacci forum on Facebook.

Tarsacci Poland:

https://www.facebook.com/groups/363009768484651

Tarsacci UK:

https://www.facebook.com/groups/795633577904679

Everything else is a masterpiece, but it doesn’t surprise me at all. Just check who is responsible for creating this equipment. Dimitar Gargov – former engineer of the Fisher Labs company, which needs no introduction to anyone, like their metal detectors, which are known all over the world. Finally, just add the name and surname: Thomas Dankowski and we have one of the best duos in this field in the world. After over two years of testing and we have the Tarsacci MDT 8000.

Water resistance is a big advantage, but to surprise nowadays, apart from performance, you have to give something else. In this case, we get amazing, soft audio that was created by someone who really dealt with real field research. The sounds do not tire for many hours, they give a precise description of the item and a lot of additional information. When we add above-average performance even with the first 11×9-inch probe, we are shocked. There’s no need to cheat. The Polish icon RUTUS Alter 71 is over 7 to 10 cm shallower in mixed mode, which can be seen in the videos below.

A quick visual comparison of Tarsacci MDT 800 and Rutus Alter 71 in heavy clay soil.

The joy of a professional detector

The popular Boratynka with 30 cm? No problem. Loud and clear, not to be missed. The machine confidently fastens on good objects and gives a descriptive response in the form of sound. Trash and the signature changes, and the sound is longer and blurry. There is no doubt. Here’s an example search video. For several weeks, Mariusz has been unable to get rid of the feeling that he should collect money for this detector. Unfortunately, it is financially out of his reach.

YouTube player

How often to search for metals

In the end, a knockout in a littered area or under the lines. Work stability. There is complete silence. Sometimes I check with a shovel if Tarsacci is still working. Do you have a problem? Is something waking up? You change the operating frequency for your choice: 6.4Khz, 9Khz, 12Khz, and 18Khz. In this way, you can influence the performance or adjust the frequency of work to the prevailing conditions or the items you are looking for. For example, we are interested in big and deep old iron, we use 6.4Khz. We need to take care of ourselves in the trash and look for something small 12 or 18Khz will be a great choice.

The manufacturer spoils us by giving a huge Li-ion battery in the set and a charger, basically two batteries with a capacity of 5000 mAh each. I don’t remember, yet, that it was possible to completely discharge it by going to 9Khz. After 4-5 hours, no line falls, and we still have a supply.

Intuitive operation of the Tarsacci device

The simplicity of use brings to mind devices from the lowest price segment. No drop-down menus or hidden functions or filters that we need to remember about. It’s an amazing advantage. We don’t stand around and rummage through equipment while others dig up stuff.

Flexibility to work in various conditions, from extremely salty beaches to highly mineralized soils, puts Tarsacci at the forefront of the best devices of this type. We have the ability to compensate for volcanic sands and magnetic soils in the form of the BLK (Black Sand) function. We also affect the salinity with the ST settings. And I don’t mean an ocean beach at all… but fields with tons of fertilizers. In this way, apart from the stability mentioned at the beginning, we get peace of mind in the form of no masking from coke or foil. This is a significant advantage over other devices that simply can’t cope in the world.

You can go back to the places you have been to and enjoy them again. In combination with the new 12-inch probe, we get another up to 10 cm more. Finally, the user’s statement:

☘️ Half a year with Tersacci and 2 months with a 12 “coil. I have flown a lot of hours, I think I used 10 batteries and one is enough for a very long time 18 hours at 6.4khz and over 30 at 18khz. There are rather no defects in the construction, the only holes in the seat post howl in the wind ? but they are already wrapped. The traces of wear on the machine are negligible. As for the new coil and without the cover, it seemed to me that it would wear out very quickly, but nothing could be more wrong, only minor scratches came out and that’s it, and the areas were plowed fields, meadows, and stones.

As for the handling, it is very strange because I have not yet met a detector that would be at maximum sensitivity all the time and was so stable ..! As with all detectors, you have to overlap and dig to understand what and where.

Anyone who has doubts and decides that it is just marketing can use the forum where users describe their experiences with this detector in English:

https://www.dankowskidetectors.com/discussions/read.php?2,152652

See you in the field!

Posted on Leave a comment

Tarsacci MDT 8000 another decision

Łukasz Karmalita’s opinion:

☘️ Half a year with Tersacci and 2 months with a 12 “coil. I have flown a lot of hours, I think I used 10 batteries and one is enough for a very long time 18 hours at 6.4khz and over 30 at 18khz. There are rather no defects in the construction, the only holes in the seatpost howl in the wind ? but they are already wrapped. The traces of wear of the machine are negligible. As for the new coil and without the cover, it seemed to me that it would wear out very quickly, but nothing could be more wrong, only minor scratches came out and that’s it, and the areas were plowed fields, meadows and stones.

As for the handling, it is very strange because I have not yet met a detector that would be at maximum sensitivity all the time and was so stable ..! As with all detectors, you have to overlap and dig to understand what and where.

Posted on Leave a comment

Rutus Alter 71 vs Tarsacci MDT 8000

A quick visual comparison of Tarsacci MDT 800 and Rutus Alter 71 in heavy clay soil.

Posted on Leave a comment

An invention that saved many lives

The hand-held mine detector – because that’s what we’re talking about – was invented by Józef Kosacki in 1941. The prototype was built in just three months, and then quickly went into serial production to “significantly contribute to the Allies winning World War II”.

Even King George VI sent a congratulatory letter to Kosacki in recognition of his merits, and yet few people know about the Polish inventor today. Just like the circumstances of the creation of the prototype.

And it all started with a tragedy. On June 1, 1941, a team of several people from the then-famous 10th Armored Cavalry Brigade was sent to comb the Scottish beach near Arbroath. A routine patrol hit the coast, which, however, had been mined before the British – for fear of German landings. But no one knew about the mines. None of the Polish soldiers returned from the mission, which shocked both British and Polish commanders. One of them was Lieutenant Józef Kosacki, who quickly decided to return to the idea he had been working on in pre-war Poland.

The starting point for Kosacki was the discovery that telegraph amplifiers react with hum to the presence of metal. That is why he used this phenomenon by constructing a mine detector – he worked on the prototype for only three months, using the phenomenon of the electromagnetic field.

What did his detector look like?

“It was light, weighed about 14 kg, and at the same time relatively simple, possible to be carried and used by one soldier” – remind Teresa Kowalik and Przemysław Słowiński in the book “Royal gift. What Poland and Poles gave to the world”. It consisted of a wooden satchel with an acoustic frequency oscillator, an amplifier, and power batteries – put on the back. And also from a bamboo stick with coils and a variometer (it’s nothing more than an inductance changer). Small, uncomplicated, and handy (“earlier devices were not suitable for use on the battlefield. They could help engineering services clearing a battlefield, but not soldiers breaking through a minefield”). And most importantly: very effective.

A handful of 1p coins were scattered on the beach. The task was to find them all. The competition, which was announced by the British Ministry just a few days after the tragic events near Arbroath, had 7 applicants. The winner turned out to be Kosacki – his detector tracked all the coins. Very quickly, thus outclassing the competition.

The device received the official name “Mine Detector, Polish Type No. 1” and quickly went into serial production. Then it entered the equipment of the British army, and over time it was used by other allied armies. The detector was used for the first time in the Second Battle of El Alamein in 1942, where it significantly contributed to the Allied victory.

“In the following years, improved and modified, the mine detector found its way to battlefields around the world. Simple, yet effective, it turned out to be extremely long-lived equipment – it was used until the 1990s, of course in a modified version. The number of people saved by it can be estimated in thousands.” That is why today Kosacki is most often referred to as “the man who contributed to winning World War II”. Or shorter: “Pole who stopped death”.

Posted on Leave a comment

Tarsacci MDT 8000

Another few interesting finds from a passing spot with Tarsacci MDT 8000.

Grapeshot ball
50 groszy aluminum post communist times…
They are waiting for us in sleep…
Posted on

Metal detector for beginners

Searching for coins, souvenirs and various types of treasures hidden underground is an activity that has many enthusiasts. Every person who wants to start their adventure with treasure hunting should equip themselves with a decent metal detector. What model will be ideal for beginners? We have some tips. We encourage you to read!

Which detector to choose for the beginning?

The choice of metal detectors is very large. There are devices with the logo of many manufacturers, with different parameters and in a wide price range. What issues should you pay attention to when looking for the perfect first detector? We have some tips!

What is our goal?

Question number one is about our goals, which is what we will be looking for. Depending on your preferences, we can focus on searching for coins, military items made of steel, jewelry, items made of non-ferrous metals, and many other valuables. If we want to focus on specific items or do not intend to waste time digging up worthless garbage, a device with a discrimination function will be an excellent choice. And matched to the artifacts we are looking for – objects.

Where will we look for valuables?

Another important issue is the areas of our search. Let’s analyze whether we want to focus on forests, meadows, beaches, and other places of this type, or whether we plan to walk with our device through a river, and ponds, and wander in the waters of seas and lakes.

Metal detector – price

Of course, the purchase of a detector is a cost and often it is not small money. It is good to determine at the outset how much we want and can pay for the device. However, it should be remembered that devices from the lowest shelf, for about PLN 150-200, may not work well and disappoint us or even discourage us from the hobby. The optimal solution for beginners is to buy a mid-range device for about PLN 1000-2500.

Metal detector – working time

The longer the expeditions, the more capacity the device should have. Keep in mind, however, that the weight of the device increases with the capacity of the battery. For beginners, heavy models may not be a very comfortable solution.

Metal detector – technology

For beginners, detectors that are easy to use and have basic functions will work best. Professional equipment is worth buying when you gain experience.

Detectors for beginners – a few suggestions

Thinking about all beginners who are looking for their first detector, we have prepared a few suggestions:

Vista SMART+ PRO

It is a lightweight, intuitive to use, and at the same time effective detector that will certainly appeal to everyone starting their adventure with treasure hunting. The device is small, handy and equipped with a separation function. Achievements can pleasantly surprise. It’s a real class by itself.

SIMPLEX+

SIMPLEX+ is an affordable, lightweight and intuitive metal detector. The device is equipped with a simple, single menu, an automatic ground balance function and a discrimination function. This detector will work both on land and in water (waterproof up to 3 meters). Compact when folded, the manufacturer offers a free software update.

Vista X

Another noteworthy proposition for both beginners and experienced users is the Vista X detector.  The greatest advantages of the mentioned device are above-average performance, ease of use and double separation. Affordable and convenient to use.

Nokta Macro Mini and Midi HOARD

The first waterproof detector for children. Two MINI versions from 4 to 8 years old and MIDI from 8 to 12 years old. Having fun together and learning about history. There’s nothing better!

Advanced and institutional detector
Nokta Macro INVENIO PRO

The world’s first detector based on artificial intelligence. The device recognizes shapes, type of object, gives dimensions and depth. The perfect tool for archaeological research. Simple intuitive interface in Polish.

Summary

The great search for treasures hidden in the earth is a fascinating activity that enjoys a growing number of enthusiasts. How to choose your first detector? First of all, it should be intuitive to use, quite light and adapted to the area in which we will conduct the search. If you have problems with the choice, it is worth relying on the help of specialists.

We invite you to use our online chat on the website and email: sklep@omnitron.pl

Posted on Leave a comment

Nokta Makro INVENIO PRO 3D visualization of objects hidden in the soil

Invenio Nokta Makro INVENIO PRO allows you to show the shape, dimensions, depth of deposition, and the type of metal from which the object is made.

Posted on Leave a comment

Fold and GO kit

Even the most expensive models of detectors have a problem with their dimensions. Fold and GO is a solution for all those who need compact sizes. Do you need to take your equipment in a backpack, fit it in a small trunk or pack it in hand luggage? Thanks to our solution, it is finally possible. Please click photo below:

 



Posted on Leave a comment

Minelab Manticore or XP DEUS II?

XP DEUS II vs Minelab Manticore who will win this duel? It depends … it depends on what we expect from both detectors because both are really good.

DEUS II is the king of ergonomics when it comes to the lack of cables, weight – 960 grams, and compactness, and there has been no competition in this category for years. What else? The audio was created by a real musician. Also undefeated for years, although Minelab created more pleasant tones and less tiring, also worse describing the subject. What is the difference? On nuances and additional sounds and their change and their modulation and volume. A piece of aluminum in the form of a can sounds differently than a coin, even if it is similar in its conductivity. It’s a lot. After a while, we know what is what. That’s what it’s supposed to be about. Disadvantage? In the long run, such audio can cause fatigue, especially in areas littered or full of iron. This is a minor difference, but for an experienced user, it is crucial.

Do we know anything more? Yes. Thomas Dankowski from the USA is a well-known American device tester before releasing them to the market. Over 40 years of experience is indisputable and his contribution to the development of many well-known devices is crucial. He has been testing Minelab Manticore for over a year and on the Dankowski forum (link: https://www.dankowskidetectors.com/discussions/index.php) he shared his observations with us, comparing it to devices such as XP DEUS II and Tarsacci MDT 8000 which also tested.

The Minelab Manticore was tested on the coast and on the beach, the inland tests simply did not take place and according to Thomas, the new Minelab is a slightly worse separating detector than the XP DEUSA II. Calabash Digger drew similar conclusions in his tests, which can be seen on his YouTube channel.

One important observation has been mentioned, the Manticore will be slightly deeper and it’s a matter of an inch or so (2-3 cm). This means performance at the level of the Tarsacci MDT 8000, which is a PI/VLF hybrid device and this means that such equipment is always deeper.

The 2D visualization of the Minelab detector in a clear field allows you to analyze the target, something more than the well-known XY plot from DEUSA XP. Unfortunately, with a large amount of iron, it does not work so perfectly and can lead to disappointment. As we know, everything requires learning.

The thing to check is the color spoof issue with heavy condensation of rusty items, but that takes time and fieldwork. It should be remembered that new software updates can change a lot for both manufacturers.

Posted on Leave a comment

Minelab Manticore The beast is out of the cage

The new beast Minelab Manticore detector and my first impressions. The price knocks you off your feet, but let’s leave it for now and start with the ML 105 wireless headphones. The build quality itself is top shelf. It can be discussed whether such closed and thickly upholstered headphones are a good choice. It’s a matter of taste and season.

Everything is complemented by a spiral cable with jack plugs for connecting headphones via a waterproof connector in the panel. Different sound quality and a nice option. Although I would not enter the water with such a set … it will fall and there is no topic.

The armrest is another example of how you can approach it in a practical way. Adjustment with a simple latch instead of a problematic screw. Way to go.

The soft design of the plastics and the strap with the logo complete the whole. It convinces me, all beautifully set on a carbon fiber seatpost with quick-release locks. In the back part, a plug for rinsing the whole after wading in sandy water. Plus.

The handle with a rubberized grip and a good angle, as well as the undercut for the index finger for weight transfer are another plus.

The panel looks sensational and here the performance of the detector is also not surprising. Buttons, display all in place and finished with the highest quality materials.

The panel looks sensational and here the performance of the detector is also not surprising. Buttons, display all in place and finished with the highest quality mater

The whole is well-balanced and compact, you can’t ask for more. No more flooding electronics like in the old Equinox model and no more breaking probe ears. Now the mount has been moved to the lower element of the frame and even if it breaks, it is not the cost of the entire probe. The 11-inch probe has additional reinforcements and does not stand out from the whole.

YouTube player