Deeptech metal detectors straight from the heart of the jungle!
Tag: xp deus II
Minelab Manticore or XP DEUS II?
XP DEUS II vs Minelab Manticore who will win this duel? It depends … it depends on what we expect from both detectors because both are really good.
DEUS II is the king of ergonomics when it comes to the lack of cables, weight – 960 grams, and compactness, and there has been no competition in this category for years. What else? The audio was created by a real musician. Also undefeated for years, although Minelab created more pleasant tones and less tiring, also worse describing the subject. What is the difference? On nuances and additional sounds and their change and their modulation and volume. A piece of aluminum in the form of a can sounds differently than a coin, even if it is similar in its conductivity. It’s a lot. After a while, we know what is what. That’s what it’s supposed to be about. Disadvantage? In the long run, such audio can cause fatigue, especially in areas littered or full of iron. This is a minor difference, but for an experienced user, it is crucial.
Do we know anything more? Yes. Thomas Dankowski from the USA is a well-known American device tester before releasing them to the market. Over 40 years of experience is indisputable and his contribution to the development of many well-known devices is crucial. He has been testing Minelab Manticore for over a year and on the Dankowski forum (link: https://www.dankowskidetectors.com/discussions/index.php) he shared his observations with us, comparing it to devices such as XP DEUS II and Tarsacci MDT 8000 which also tested.
The Minelab Manticore was tested on the coast and on the beach, the inland tests simply did not take place and according to Thomas, the new Minelab is a slightly worse separating detector than the XP DEUSA II. Calabash Digger drew similar conclusions in his tests, which can be seen on his YouTube channel.
One important observation has been mentioned, the Manticore will be slightly deeper and it’s a matter of an inch or so (2-3 cm). This means performance at the level of the Tarsacci MDT 8000, which is a PI/VLF hybrid device and this means that such equipment is always deeper.
The 2D visualization of the Minelab detector in a clear field allows you to analyze the target, something more than the well-known XY plot from DEUSA XP. Unfortunately, with a large amount of iron, it does not work so perfectly and can lead to disappointment. As we know, everything requires learning.
The thing to check is the color spoof issue with heavy condensation of rusty items, but that takes time and fieldwork. It should be remembered that new software updates can change a lot for both manufacturers.
Nokta Makro The Legend System Software Update 1.10 beta
Updates Made:
1. M3 multi frequency in PARK mode has been updated to prevent coins from being masked by aluminum foil.
2. Bottle Cap Rejection setting has been added.
When the device is in multi frequency, select the Recovery Speed setting and press the pinpoint button. When you navigate with the right and left buttons, you will see the letters “bC” appear on the right side of the screen. You can adjust the bC value between 1-8 using the + and – buttons. When the bC is 0, it means that it is off.
3. Ground Suppressor setting has been added.
It is used to eliminate false ground signals in tough terrains. To access the setting, select the Recovery Speed setting and press the pinpoint button. When you navigate with the right and left buttons, you will see the letters “GS” appear on the right side of the screen. You can adjust the GS value between 1-8 using the + and – buttons. When the GS is 0, it means that it is off. It is recommended that you leave this setting at off position unless needed.
4. The audio emitted as the Tone Break points are changed while in 60-Tone, has been modified with increased bass.
5. Audio Gain setting has been activated in the Gold Field Mode.
6. Warning tones have been added to the buttons.
The buttons will now emit a warning tone in the following cases:
a) To indicate the minimum and maximum levels of settings.
b) When an inactive setting in a specific mode trying to be activated.
7. The brightness of the Backlight Level 1 has been reduced.
8. Bluetooth Chip Version will now be displayed.
When the Bluetooth headphones are paired with the device and the Bluetooth setting is selected, press and hold the Discrimination button. The Bluetooth chip version will be displayed in the clock section. When the button is released, the clock will be displayed again.
9. While in Automatic Ground Balance, the auto backlight will now be lit until the ground balancing is completed.
10. The loudness of the Volume Level 1 has been reduced in PARK, FIELD and BEACH modes.
11. A new level 9 has been added to the Iron Filter (IF) setting.
There has been no change to the levels 1-8. Level 9 will become handy when trying to discriminate some unwanted mid-conductors such as shotgun cartridges as iron.
12. General improvements have been implemented.
Minelab Manticore The beast is out of the cage
The new beast Minelab Manticore detector and my first impressions. The price knocks you off your feet, but let’s leave it for now and start with the ML 105 wireless headphones. The build quality itself is top shelf. It can be discussed whether such closed and thickly upholstered headphones are a good choice. It’s a matter of taste and season.
Everything is complemented by a spiral cable with jack plugs for connecting headphones via a waterproof connector in the panel. Different sound quality and a nice option. Although I would not enter the water with such a set … it will fall and there is no topic.
The armrest is another example of how you can approach it in a practical way. Adjustment with a simple latch instead of a problematic screw. Way to go.
The soft design of the plastics and the strap with the logo complete the whole. It convinces me, all beautifully set on a carbon fiber seatpost with quick-release locks. In the back part, a plug for rinsing the whole after wading in sandy water. Plus.
The handle with a rubberized grip and a good angle, as well as the undercut for the index finger for weight transfer are another plus.
The panel looks sensational and here the performance of the detector is also not surprising. Buttons, display all in place and finished with the highest quality materials.
The panel looks sensational and here the performance of the detector is also not surprising. Buttons, display all in place and finished with the highest quality mater
The whole is well-balanced and compact, you can’t ask for more. No more flooding electronics like in the old Equinox model and no more breaking probe ears. Now the mount has been moved to the lower element of the frame and even if it breaks, it is not the cost of the entire probe. The 11-inch probe has additional reinforcements and does not stand out from the whole.
